FAQs
More FAQs- Will the application of urethane disrupt my business?
- Are there instructions to follow after my hard-surface floors are cleaned?
- Is urethane slippery when wet?
The initial application process will require stripping any existing coatings and applying urethane coating plus drying time. This process can be done after hours and will require only daily cleaning for the life of the finish, averaging two years. Because there is no buffing or recoating for that time period, there will be no other disruptions. The reapplication process will not require further stripping.
Before you walk on your floors, it’s best to allow drying time of at least 4 hours but we recommend 8 hours. Be cautious and protect floors from getting wet for 24 hours after application of either finish as it is not yet thoroughly cured. You can return furniture to your floors (with suggested use of felt pads) after 24 hours and return rugs to floors after 24 hours.
Any coated surface can be slippery when wet. Our urethane product is considered to have acceptable slip resistance according to the American National Standards Institute (ANSI)/National Floor Safety Institute (NFSI) B101.3-2012 test method for measuring wet dynamic coefficient of friction (DCOF) of common hard-surface floor materials. We offer optional additives to create high slip resistance (lower probability of slipping) for wet environments or areas of concern.